Four color clover
Copyright Claim
Four color clover
Boost
39
59
5
Print Profile(1)
0.08mm layer, 3 walls, 20% infill
Designer
2.8 h
1 plate
Boost
39
59
5
3
35
19
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x175mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to BambuLab Green
At layer #20 (1.68mm) swap to Yellow
At layer #24 (2mm) swap to Jade White for the rest.
Comment & Rating (5)
All
Print Profile
0.08mm layer, 3 walls, 20% infill
選擇的圖片不錯👍
0
Reply
Print Profile
0.08mm layer, 3 walls, 20% infill
Beautiful! Love the details on the water droplets! Thank you for the amazing design!
0
Reply
Print Profile
0.08mm layer, 3 walls, 20% infill
I had the wrong color. But i like this Picture.
0
Reply
Boosted
果然它也是需要包裝的…
#四色幸運草
#3dp無限可能
0
Reply
Print Profile
0.08mm layer, 3 walls, 20% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld