---if you like my work please, follow me and spread some love giving some Boost and downloading mine models🙏---

The seat on the back is shaped to accommodate a 1mm thick magnet with a diameter of 10mm, pay attention if you resize the magnet model.

This model is simply resizable directly in Bambu Studio using the scale function as follow (Note that you must not modify Z axis dimensions and you could lose the magnet size form):

-If some stringing occour you can simply remove it using your lighter as follow:

Use the flame for only few seconds and you will be surprised by the result! from left to right picture like magic😄

--------------------------------------------------------------------------------------------------------------------------------

HUEFORGE Instructions: Consider to buy me a coffee😁❤️ or give a Boost🙏

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to BambuLab Green
At layer #20 (1.68mm) swap to Yellow
At layer #25 (2.08mm) swap to Jade White for the rest.
if you want green frame, swap again on green for the last 3-4 layers

If you want any modifications or variations, feel free to ask, if you have specific requests write to me privately, and I will do my best to fulfill your desires❤️