Warhammer 40K Thunderhawk Gunship 战锤40K雷鹰
Copyright Claim
Warhammer 40K Thunderhawk Gunship 战锤40K雷鹰
Boost
71
139
22
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
7.4 h
2 plates
Open in Bambu Studio
Boost
71
139
22
6
179
47
Released
Description
Warhammer 40K Thunderhawk Gunboat
The parts are all designed for the card slot mechanism and do not require glue
Replaceable Legion Logo
Only my favorite Ultramarines are here
The assembly method is shown in the following figure
The landing gear, cockpit cover, and upper wings are all movable parts
If there are any problems with assembly, please message me privately
战锤40K雷鹰炮艇。设计了卡榫机构。不用胶水组装
组装也很简单，各种活动部件，希望大家喜欢
Comment & Rating (22)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
Scaled up 300 percent.
(Edited)
The designer has replied
1
Reply
I'm glad you like it. I didn't expect the Warhammer 40K IP to be so popular. My next model is also Warhammer, and I hope you follow me
0
Reply
Could use some optimization of the print profile and perhaps better supports, but that's beyond my skill level. As is it came out well. But I can't figure out what the little circle pieces are for lol. I also can't find one turret but that's an easy reprint.
The designer has replied
0
Reply
Thank you for leaving me a message
Little circle is used to fix the gun turret on the wings，
But it seems that it's not necessary
1
Reply
Replying to @user_2739965139
Have you tried a profile with organic supports? Do they work well?
0
Reply
OK, so I have a couple problems together so I will start with the cock. Looks like according to your pictures that it’s supposed to downwards from the front to the back however, when it prints it down to the front of the carpet and trying to get it to fit , the second thing is the struts underneath your face I guess like front boards however in order for me to put them in I had to put them in sideways at the top sideways. It wouldn’t fit with Waze so that was a problem I had also I noticed that things that were supposed to be able to at least look like they rotate, the fold if I tried to move it because you were different PLA I was using or if that was just a print also on top of the ship I couldn’t get it to fit very well so I had to go out and get some sandpaper to try and hold that down a little better some of the pieces very nice slots, which was pretty good so I did weapons printed ready to be painted, but yeah, those were the problems that I had with this
The designer has replied
0
Reply
Thank you for your suggestion. This is my first Warhammer 40K model, and there are indeed many shortcomings. There is too much support, but it should not affect assembly. My next model is also a Warhammer 40K. I hope you follow me. If you are a Warhammer fan, you must know what this is
0
Reply
just finished plate 1. now I am looking forward to see how the build goed
0
Reply
有点小帅
The designer has replied
0
Reply
谢谢 支持 打印个玩玩呗
0
Reply
Replying to @user_2739965139
可以免费下载么
0
Reply
Replying to @user_948672055
当然是免费的，如果能打赏点 更好了，哈哈
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
good result, only too much support
The designer has replied
0
Reply
Thank you for your input and I will continue to refine my technique
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
Printed out the model for my son, everything worked out great and had no problems with the file. Excellent model!
The designer has replied
0
Reply
Thank you for liking my model and let's keep working on it
0
Reply
Boosted
amazing work
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
It came out great! My nephew loved it.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
A couple pieces need optimizing for supports to look as good as the rest. But it's a really solid model!
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld