I've started to print this amazing dice tower but soon discovered that most of the parts are broken, have non-manifolds or simply contain internal geometry etc since jimsbeanz cobbled the tower together from different other models. that is why i optimized everything and here is the result for you to enjoy and print yourself

with the optimizations i've reduced the print time significantly, especially on the base and also fixed lots of little details that made it hard to print and paint (like small gaps beween the objects etc.).

Including supports, the original model used up more than 850 g of PLA - the optimized version consumes less than 790 g.

Just primed and not painted yet:

Printing

• front/back is printed twice
• ramp is printed twice
• spikes are needed 4 times
• all other parts are needed 1 time

Use tree supports for all the parts: other than the original recommendation the base is printed in the upright orientation since all the inner geometry that prevented proper printing has been fixed.

i've provided a print profiles for Bambu Studio, but the 3mf file can also be used with other slic3r based slicers like Prusa Slicer

a fair warning: the side pieces with the Sister look amazing but because of the intricate details, it time consuming to print - if you can, print it with soluble supports or prepare yourself to snip of supports for 30 minutes from all the little nooks and crannies ;)