Milwaukee M18 Fuel Tool & Battery Mounts by IndomReps

IndomReps

Tools>Organizers

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 5 walls, 20% infill

Designer

19.3 h

5 plates

4.9(164)

0.2mm layer, 5 walls, 20% infill

4.7 h

1 plate

4.9(30)

0.2mm layer, 3 walls, 20% infill

4 h

2 plates

4.9(14)

PLA 0.20mm

2.9 h

1 plate

4.7(18)

Click to see more

Open in Bambu Studio

Boost

468

922

259

1.8 k

2 k

Released

Description

Milwaukee M18 Tool and Battery Mounts

*** Update 1 - 10/28/2023 ***

Revised tolerances of model so that fit is a little bit looser and releases from the battery a lot smoother.
Revised thickness of batteries mounting face so that the larger High Output batteries can be mounted flush to a surface without the battery interfering with the mounting surface.

Tool mount will work with most tool types, intended to be underhung mount but can be side mounted if it suites a certain tool. The battery mounts will work with any M18 battery and can me mounted in any orientation as it uses the batteries locking mechanism to hold it into place. Use 2 #8 screws to attach them to whatever you want.

I've printed these out of PLA and Pro PLA with no issues with strength but might want to use PETG or ABS if you want to use these in something like a work truck or other environment that might get really hot in warm weather.

Comment & Rating (259)

@LaroucheDesign

Print Profile

0.2mm layer, 5 walls, 20% infill

good print for the batery rack but a major problem for the tool rack cause the hook on every of my drill make it impossible to clip so i had to shim every one of them …

(Edited)

@BackStepFF

Print Profile

0.2mm layer, 5 walls, 20% infill

printed very nice no complaints

@BAeng

Boosted

Print Profile

0.2mm layer, 5 walls, 20% infill

Edit: Love this! Default settings. The Tool Mount has been easy to slide various tools on and off. Unfortunately, the tools all vary in play on their battery connector. The Battery Mount works great as well, but again the batteries vary with what size their connector is. In my case my small batteries like my 5.0’s work the best, my 8.0’s work well but are harder to take out, the 12.0’s have a really tight fit that I can’t take them off without tapping/banging them off when depressing the button.

(Edited)

@presantg

Boosted

Print Profile

0.2mm layer, 5 walls, 20% infill

love it

@YetAnotherPrint

Print Profile

0.2mm layer, 5 walls, 20% infill

I partially printed this to act as a skacer for the full print.

@YetAnotherPrint

Print Profile

PLA 0.20mm

these are fantastic, my only recommendation is to make it taller to fit well under a shelf but still clear the battery, I had to partially print another set to act as spacers, but the design and it's function works great!