GOKU SSJ PORTRAIT
Copyright Claim
GOKU SSJ PORTRAIT
Boost
92
142
25
Print Profile(2)
For A1 mini - 0.4 - 0.08mm layer, 1 walls, 100% infill
Designer
3.6 h
1 plate
0.08mm layer, 1 walls, 100% infill
Designer
5.5 h
1 plate
Open in Bambu Studio
Boost
92
142
25
18
120
100
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x237.91mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap to Jade White for the rest.
Comment & Rating (25)
All
Print Profile
For A1 mini - 0.4 - 0.08mm layer, 1 walls, 100% infill
Muy buena calidad
(Edited)
0
Reply
hay que hacer algo especial para imprimir, me refiero a selección de capas o algo o directamente con el AMS seleccionar los colores y darle a imprimir?
0
Reply
Replying to @arturok17
Desde su perfil sale perfecto, ya combinar otros colores desde el ams claro que puedes
0
Reply
Print Profile
For A1 mini - 0.4 - 0.08mm layer, 1 walls, 100% infill
muy muy bonito me encanta gran trabajo
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
Nice print. colours look good
0
Reply
Boosted
Print Profile
For A1 mini - 0.4 - 0.08mm layer, 1 walls, 100% infill
Amazing ! best picture i had print with my A1 mini
0
Reply
Boosted
Print Profile
0.08mm layer, 1 walls, 100% infill
great
0
Reply
Print Profile
For A1 mini - 0.4 - 0.08mm layer, 1 walls, 100% infill
great hue forge
0
Reply
Print Profile
For A1 mini - 0.4 - 0.08mm layer, 1 walls, 100% infill
printed all petg with traslucent colors and its BAAAANG!!!! didnt have the Orange but with Red and Yellow make che magic too! thanksssss
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
Print came out good.
0
Reply
Boosted
Print Profile
For A1 mini - 0.4 - 0.08mm layer, 1 walls, 100% infill
so dope!
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld