Universal car phone holder by Le RmX en 3D

Le RmX en 3D

Tools>Gadgets

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 4 walls, 30% infill

Designer

3.7 h

2 plates

4.7(15)

V2 - 0.2mm layer, 4 walls, 30% infill

Designer

2.9 h

2 plates

4.0(4)

0.2mm layer, 2 walls, 15% infill

45 min

1 plate

Boost

164

218

235

167

Released

Description

Universal car phone holder, everything is printed on a single plate, unless you want to make the clamp in PETG.

I suggest making the clamp out of PETG because in PLA, it deteriorates very quickly and stops working.

Ultra-simple assembly, no screws to use, only an elastic band.

Feel free to give me feedback on the use and printing of the holder.

Comment & Rating (31)

@user_3714247037

Print Profile

0.2mm layer, 4 walls, 30% infill

be careful with removing the supports I had to print a piece twice since I was to hard while removing supports

The designer has replied

@LeRmXen3D

Too cool to see one printed! Thank you so much! I recommend printing the V2 profile, which is better in terms of clips. Really sorry about the supports, I've printed several on my end and haven't broken any yet. Don't hesitate to share a new profile if you find better settings! :D

@user_3714247037

Will do! I think I was to fast and the pla I used is brittle. After I took my time with the second piece it worked like a charm. I printed the adapter in PETG to be more resistant and it fits fine in my car! thanks for the design!

@Bozo

Print Profile

0.2mm layer, 4 walls, 30% infill

@paulvv

Print Profile

0.2mm layer, 4 walls, 30% infill

I really like the mechanics on this except I would maybe change the tension direction of the elastic so that the holder is constantly clamping rather than open that way you know the phone is secure..other than that great print .

The designer has replied

@LeRmXen3D

Thank you very much for your feedback! I have been using it for 2 weeks, the phone holds up well with its own weight, I no longer have a problem with the clamp when it is made of PLA, it comes off easily after a moment, I advise you instead to making PETG is better.

@Jamescolgan

Print Profile

0.2mm layer, 4 walls, 30% infill

Falls apart sometimes

The designer has replied

@LeRmXen3D

I advise you to print the V2 hook in PETG, which is stronger

@Yeltek

I bought an old car with no sat nav, the night before pick up I realised I had no way to mount a phone for maps this printed super fast, after stealing a hair band from the wife I was ready to go. very nice design, some supports maybe where not necessary but it is of little concern, better to be safe than sorry👍

The designer has replied

@LeRmXen3D

"Thank you very much for your feedback! Indeed, I think some supports are not necessary. Don't hesitate to give me feedback if you try different settings again."

@Varvarin

Print Profile

0.2mm layer, 4 walls, 30% infill

Honestly, it's a fantastic design with one minor design flaw. Most of us use popsockets or other magsafe compatible devices on our phones, and this holder isn't compatible. I took the liberty of designing in a recess for the popsocket, which made it work. If this was originally incorporated i'd have given it a 5/5!

The designer has replied

@LeRmXen3D

Thank you very much for the feedback and the rating! Do you have a picture of your final product? Besides creating a notch all along, I don't see how to make it compatible with all phones with popsockets.