Summary

Updated

Deadpool bookend. Two choices for the base, one with a longer section under the book for added stability.

Printed at 25% infill, can be printed with more or less depending on how much weight the books will have.

I made an error creating the left side and had to re-create the STL.

Print Settings

Printer Brand: 

Wanhao

Printer:                      

Wanhao Duplicator i3 Plus

Rafts: 

Doesn't Matter

Supports:                      

Yes

Resolution: 

.1 - .2

Infill:                      

25

Filament:

3D Fillies PLA+                Black, Red, White

Post-Printing

I printed it is 3 parts:

1. Base - Black
2. Top of Book end
3. Eye - White

I oriented the top section so that it printed flat with no supports with the flat side down - detailed side facing up (left side will need to be flipped 180 degrees). I put a pause in at Layer 320 (when printing at .1) - the last layer before the "outside" starts to print to change the filament to red.

Printed the "eye" in white. Assemble the 3 pieces and apply glue to the joints if you like.