Thanks for visiting!
Trying different variations of flags and I thought this one ended up better then I thought it would. Hope you enjoy.
They come out fairly thick so it has a nice feel to it.
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
Print at 15% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Black Transmission Distance: 0.3
PLA BambuLab Tough Vermilion Red Transmission Distance: 3
White Transmission Distance: 6
Swap Instructions:
Start with Blue
At layer #9 (0.8mm) swap to Red
At layer #16 (1.36mm) swap to White for the rest.