Panda Cub (piggy) Bank (in two sizes) for saving your coins.

The large Panda Cub Bank is 234mm (~9.2") tall, and the small Panda Cub Bank is 156mm (~6.1") tall.

Assembly instructions are provided in the attached photos. Adhesive such as Superglue is needed to attach some of the parts - as described in the photos.

Simply lift and twist the panda's head (counter-clockwise) to open the bank and count (or spend!) your savings.

The provided STL files are intended to be printed in PLA (though PETG should also work fine). There are large and small versions separated into the white parts and the black parts. Supports are needed for the white parts but not for the black parts. Of course, you don't have to adhere to the traditional panda black and white colors - pink and white, anyone?

PrusaSlicer 3MF files are provided for generic PLA for the white parts and for Prusament PLA for the black parts.

G-code files are provided for the small version for the Original Prusa MK4 using Input Shaper. Printables wouldn't accept the large version g-code files (too many lines, perhaps?) despite numerous upload attempts.

The WHITE parts seen in the photos were printed on an Original Prusa MK4 in FilaCube White PLA with a 0.4mm nozzle at 0.2mm STRUCTURAL layer height using Input Shaper with a 10% Gyroid infill, a Concentric top fill pattern, Fuzzy Skin on the Outside walls, and Organic supports on the build plate only.

The BLACK parts seen in the photos were printed on an Original Prusa MK4 in Prusament Galaxy Black PLA with a 0.4mm nozzle at 0.2mm STRUCTURAL layer height using Input Shaper with a 10% Gyroid infill, a Concentric top fill pattern, and Fuzzy Skin on the Outside walls.