Sets speed, brims and support for easier printing. 

Andy 3d

user_4134919668

OddPlasticity

Spider Witch Printing and Assembly.pdf

Witch Spider_Closer.jpg

Instructions.jpg

Witch Spider_Main Pic.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_4.webp

plate_5.webp

Eyes

plate_1.png

plate_2.png

Head

plate_3.png

Legs

plate_4.png

Wand

plate_5.png

<ul><li>LEGS: When orienting your print, lay the model upside down on its knees. I've designed this piece to get good bed adhesion if you print it that way. I recommend printing quite slowly (I slow my printer right down to 50 mm/s but that is probably a bit too cautious). Definitely turn on Z-hops. Use supports and add a 5mm brim. Recommend printing at 0.16 layer height.</li><li>EYES: For best results, print at a fine level of detail. It's easy to print these peg-side down, but if you have a textured mat, you might want to experiment with printing them eyeball down. It produces a different appearance. Recommend printing at .08 layer height.</li><li>HEAD: I've modeled in a flat section at the back of the spider's head. Lay that surface on the mat. This will allow the holes in the model to be printed without pesky supports and makes sure your visible surfaces end up with the best finish. Any layer height is fine.</li><li>HAT: There are tons of ways you can print this, but I recommend printing it brim side down with tree supports. Tweak your supports to be as minimal as possible. You may need to do a bit of clean up if you want the underside of the hat to be pristine. Recommend 0.12 layer height. </li><li>WAND: Use a brim with a 0.01 gap to make the brim easier to separate from the model.</li></ul>

This is the first model in a bright, weird and somewhat surreal series of cute spiders in dressup costumes. Now you may be wondering … why would a spider go to all the trouble of wearing a creepy costume when they are already … well … a spider? I don't have a clever answer to that. All I can say is that I am having a blast making weird costumes for arachnids and if you're interested, I'd love to share some of 'em with you! &nbsp;To make the process easy, please check out the printing and assembly documentation!&nbsp;If you enjoy these models, please drop me a follow and <a target="_blank" href="https://www.buymeacoffee.com/app/dashboard" rel="nofollow noopener">please consider buying me a coffee</a>.&nbsp;I hope you have fun making the Spider Witch!

Cute Spider Toy: The Witch

Global

Print Profile(1)

Description

Documentation (1)

Comment & Rating (3)

License

Related Models

spider

Black Widow Articulating Spider

CUTE MINI BEE

Dummy 13 Spider Man 200%