This is the updated version then my first upload of this design. Better colors, better sizing, better overall.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA BambuLab Matte Blue Gray Transmission Distance: 1.5
PLA Polyterra Savanah Yellow Transmission Distance: 3.4
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #11 (0.56mm) swap to Blue Gray
At layer #34 (1.48mm) swap to Savanah Yellow
At layer #48 (2.04mm) swap to White for the rest.