Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 166.65x234.88mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Ash Gray
At layer #15 (1.28mm) swap to Mandarin Orange
At layer #20 (1.68mm) swap to Jade White for the rest.