我将AMD R7 8700G放大到400%的大小，于是就诞生了这个看起来有点滑稽的模型。它非常巨大，这可能是你见过的最大的“CPU”。
I enlarged the AMD R7 8700G to 400% in size, and thus this somewhat comical model was born. It's enormous, possibly the largest "CPU" you've ever seen.

模型一共有3个部分。（我把CPU顶盖拆分成两个零件是因为我想避免使用到支撑。）请将首层线宽设置为0.3mm，否则模型上的文字可能无法被清晰地打印出来。你需要用到黑、灰、黄、蓝4种颜色的耗材打印它们，总耗时大约7个半小时。然后你可以使用速干胶将它们粘到一起。
The model comprises three parts. (I separated the CPU top cover into two components to avoid using supports.) Please set the line width of the first layer to 0.3mm; otherwise, the text on the model may not print clearly. You will need four colors of filaments - black, gray, yellow, and blue - to print them, and the total printing time will be approximately seven and a half hours. Afterward, you can use fast-drying glue to assemble them together.

希望你能喜欢这个模型！
I hope you enjoy this model!

AMD YES!