This is a design by me, transformed into a filament painting using Hueforge.
If you scale it, dot change the height of the image
You don't need a AMS to print this, but it makes it alot easier

Only 3 colors for this model.

This looks awsome even without the glow in the dark! You can replace the color for the final layers and get a different look that still looks good.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:

PLA MATTE Sunlu Matte Black Transmission Distance: 5

PLA+ Sunlu Blue Transmission Distance: 4

PLA Spectrum Glow in the Dark Transmission Distance: 5

Swap Instructions:

Start with Matte Black

At layer #5 (0.56mm) swap to Blue

At layer #7 (0.72mm) swap to Glow in the Dark for the rest.