Search models, users, collections, and posts
Wind Spinner with Bearings
Remixed by
Print Profile(1)
0.24mm layer, 2 walls, 15% infill
Designer
3 h
2 plates
Open in Bambu Studio
Boost
130
327
35
10
323
151
Released
Description
Boost Me (for free)
“Think of it as throwing a log on the creative fire"
Materials needed:
Required bearings - 4 Needed
- 8x16x5mm Double Metal Shield Single Row Flanged Ball Bearings Deep Groove Ball BearingsBearing - https://www.amazon.com/gp/product/B0C9MKP3WG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Required Washers - 4 Needed
- 8.5mm x 16mm x 0.8mm 304 Stainless Steel Flat Washer
Directions:
Bearings need to be pressed into the TOP and BOTTOM sections ( This is a tight fit )
2. Place washer on the Main body screw
3. Slide on the fins ( this will be a tight fit and you will need to force it on )
4. Add another washer on top of fin.
5. Screw on the CAP and you are done!
Membership
Join
This remix is based on
License
If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (35)