Original Design: Vault Teleporter - Shirtoid

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.3
PLA+ Sunlu Blue Transmission Distance: 4
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #11 (0.56mm) swap to Blue
At layer #19 (0.88mm) swap to Army Red
At layer #21 (0.96mm) swap to Pure Yellow
At layer #29 (1.28mm) swap to White for the rest.