My first HueForge and a creative idea I had for this image. Enjoy these models of mine!
I had to upload just the stl file as the slicing time exceeded the limit of MakerWorld.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Green
At layer #14 (1.2mm) swap to Tan
At layer #20 (1.68mm) swap to Light Blue
At layer #24 (1.92mm) swap to White for the rest.