My first HueForge project a painted style Butterfly :)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Bambulab Matte White Transmission Distance: 5.0
PLA Bambulab Matte Lilac Purple Transmission Distance: 3.4
PLA  Bambulab basic black Transmission Distance: 0.9
PLA Generique  blue Distance: 5.0

Swap Instructions:
Start with basic black.
At layer #11 (0.96mm) swap to blue
At layer #17 (1.44mm) swap to Matte Lilac Purple 
At layer #20 (1.84mm) swap to Matte White for the rest.

PS. I took a remarkably close picture in reality everything looks more blend.