-----------------------------------------------

柜子人系列

三抽屉版本

23CM高

手臂可分开 且 手臂位置居中

需要用胶水来连接手臂

蝴蝶结是作为自选模型存在的，所有我的打印3mf配置文件中未加入该模型

-----------------------------------------------

推荐使用0.16mm或更高的层高来打印，以加快打印速度，

模型被设计的易于打印，你可以从主柜体的背部以及抽屉的底部发现这一点，

推荐将支撑设置为有机树且顶部z距离设置为0.12左右来获得更好的支撑效果，

模型预留了0.4mm的公差以防抽屉插入过紧，

祝你有愉快的打印体验~

-----------------------------------------------
Cabinet Man Series
Three-Drawer Version
23cm in Height
Arms are detachable and centered, Glue is required to attach the arms
The bow tie is an optional model not included in my 3mf print files
-----------------------------------------------
It's recommended to print with a layer height of 0.16mm or higher to speed up the printing process.

The model is designed for easy printing, which is evident from the back of the main cabinet body and the bottom of the drawers.

For better support, setting the supports as tree-like structures with a top Z distance of about 0.12 is advised.

A tolerance of 0.4mm is provided to prevent the drawers from fitting too tightly.

Wishing you a pleasant printing experience~