Print at 100% infill with a layer height of 0.12mm with a base layer of 0.12mm
The Model is 185x185mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA Hatchbox White Transmission Distance: 8
PLA BambuLab Basic Orange Transmission Distance: 5
TPU Overture Red Transmission Distance: 5.4
PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 4 unique filaments
Swap Instructions:
Start with White
At layer #5 (0.6mm) swap to Orange
At layer #10 (1.2mm) swap to Red
At layer #15 (1.8mm) swap to Black for the rest.