-----------------------------------------------
柜子人系列
五抽屉版本
20CM高
手臂不可分开 且 手臂位置居中
-----------------------------------------------
推荐使用0.16mm或更高的层高来打印,以加快打印速度,
模型被设计的易于打印,你可以从主柜体的背部以及抽屉的底部发现这一点,
推荐将支撑设置为有机树且顶部z距离设置为0.12左右来获得更好的支撑效果,
模型预留了0.4mm的公差以防抽屉插入过紧,
祝你有愉快的打印体验~
-----------------------------------------------
Cabinet Man Series
Five-Drawer Version
20cm in Height
Arms are fixed and centered
-----------------------------------------------
It’s recommended to print with a layer height of 0.16mm or higher to speed up the printing process.
The model is designed for easy printing, as seen from the back of the main cabinet body and the bottom of the drawers.
For better support, it's advised to set the supports as tree-like structures with a top Z distance of about 0.12.
A tolerance of 0.4mm is allowed to prevent the drawers from fitting too tightly.
Wishing you a pleasant printing experience~