Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 1.4mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA+ Sunlu Skin Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #12 (1.04mm) swap to Yellow
At layer #16 (1.36mm) swap to Skin for the rest.