ULTIMATE Helmet Holder V2 by Flobi

Flobi

Household>Decor

Print Profile(10)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

ORIGINAL - 0.2mm layer, 2 walls, 0% infill

Designer

1.4 h

1 plate

5.0(1)

ORIGINAL - 0.2mm layer, 3 walls, 10% gyroid infill

Designer

5.9 h

1 plate

ORIGINAL - 0.2mm layer, 2 walls, 30% support cubic infill

Designer

3.6 h

1 plate

ORIGINAL - 0.2mm, 2/3 walls, 10/30% infill

Designer

9.1 h

1 plate

Click to see more

Boost

523

753

109

750

320

Released

Description

If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated!

I'll be looking forward to interact with you guys and our shared passion for making! :)

https://www.buymeacoffee.com/flobi
________________________________________________________________________________________________________________

Tired of flimsy holders that you can't trust to handle the weight of your sweet looking gear? Look no further! This **SUPER strong** helmet holder is engineered to keep your helmet secure and accessible. Whether it's a motorcycle helmet, a racecar helmet or just a bicycle helmet, this holder ensures your prized possession is showcased with style.

The holder's design allows for complete freedom in how you present your helmet, just by tilting and rotating it how you want it to be displayed.

Designed with durability in mind, the holder can support more than just helmets. Hang your jacket with confidence, knowing that the holder won't let you down.

DISCLAIMER: While the holder is incredibly strong, it's designed specifically for helmets.
For optimal safety, I advise using it only for its intended purpose. Holding helmets…
Use ABS/ASA or PETG to be absolutely sure that it holds up in the long run. There shouldn't be a problem with using PLA if no direct sunlight hits it so on an so fourth, but i wouldn't suggest it.

V1 Pros:
- Only uses 2 strong screws
- Looks cool with gear on
- Easy to print

V1 Cons:
- To some it might look like a um… a um… you know what…

V2 Pros:
- Only uses 2 strong screws
- Looks EVEN COOLER with gear on
- Easy to print
- Has a key hook

V2 Cons:
- To some it still might look like a um… a um… hehe…
- Jealous friends with helmets
________________________________________________________________________________________________________________

Parts list V1:
1x Helmet Sphere Rest
1x Wall Mount

Parts list V2:
1x Set of Style Inserts (If you want. Otherwise print the “Raw” version of the V2 Wall Mount
1x Helmet Sphere Rest
1x Wall Mount
1x Key Hook

Print instructions:

All files prints very nicely on the Ender V3 KE.
The only things i changed in the print settings are the following:

- Infill Density
- Infill Pattern
- Number Of Walls

Follow the below matrix to achieve the same great results as i got:

Parts	Quality	Support	Infill	Brim	Walls
V1+V2 Helmet Sphere Rest	Variable	No	10% Gyroid	No	2
V1+V2 Wall Mount Raw/Style	0.2mm	No	10% Gyroid	No	3
V2 Style Inserts	0.2mm	No	0% NONE	No	2
V2 Key Hook	0.2mm	No	0% NONE	No	2

Comment & Rating (109)

@schwaighoferart

Ich nutze seit wenigen Tagen die Halterungen und bin sehr zufrieden. Gerade im Bereich Cosplay sind Helme nicht einfach an Wänden zu montieren, da sie oftmals nur an einem Haken befestig werden können. Mit dieser Halterung und der großen Auflagefläche, kann man die 3D-gedruckten Helme nun wunderbar zur Schau stellen!

The designer has replied

@Flobi

WOW! I'm blown away with how awesome that look! DAMN! :O Those helmets looks SO freaking good! They don't look 3d printed at all.

@sajmon313

Print Profile

0.2mm layer, 3 walls, 15% infill

Very loose fit on these parts, use glue.

@Flobi

The fit should be tight. I've only tested the fit with PLA though. So maybe that's the reason for a slight deviation in tolerances. Good to know. :) Maybe i should release versions of the ball with different tolerances so that people can choose how loose/tight they want it.

(Edited)

@3MPrint_pro

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Good job !

@Flobi

Thanks! Nice color. :P

@berambolo

Print Profile

0.2mm layer, 3 walls, 15% infill

Nice - printed smaller ones for the kids

@Flobi

Haven't thought about using it for bicycle helmets. Nice! :D

@CustomCreations

Print Profile

0.2mm layer, 3 walls, 15% infill

great !

@06andrewbe

Print Profile

0.28mm layer, 2 walls, 6% infill

Works perfectly

@Flobi

Looks SICK! :D

@user_164161561

Print Profile

0.2mm layer, 3 walls, 15% infill, 80% scale

great fit and overall print. Printed at 50% speed for cleaner finish.

(Edited)

@Flobi

Looks very clean indeed :D Must have taken AGES to print hehe.

@dazmorbus

When does V2 come out? I printed version 1 and is awesome but I love the idea of the inserts and key holder

The designer has replied

@dazmorbus

this is our version 1. love it

@Flobi

The V2 came out 07/05-2024 :) You can find it under the V2 folder. To answer your questions regarding the style inserts and key hook. Some people have managed to make them fit on the V1 by cutting off the locking tabs. The key hook fits both the V1 and V2 :)

@dazmorbus

Replying to @Flobi :

Sorry to bother you again im not seeing the folder? I just see the 4 files you have up there but when I load them into the slicer it just has the mount and the ball.

@Safi102

Boosted

just wondering what’s the best size of screws to use if anyone has multiple which screws they found best for the job

The designer has replied

@Flobi

It's designed with a 5mm hole. But you can go down in thickness and overall size depending on the mounting surface. Mine is installed on a brick wall, so i used some chonky 5mm screws with wall anchors. I wanted to be absolutely sure that it never falls down. :) So in general my advise would be to use thick screws if possible. Better safe then sorry i guess. :D

@Safi102

Boosted

Replying to @Flobi :

Thank you so much for that info. Also is version 2 more study than 1 structurally or is it just aesthetic based with the key hook ?

@Flobi

Replying to @Safi102 :

Equally as sturdy. :) Both models a designed to be very strong. The only things that differentiates between V1 and V2 are the following: - Easier mounting thanks to the holes through the front part of the wall mount - Better designed holes for a better look (No more steep overhangs anywhere in any of the models) - Style inserts that let's you customize the look of the wall mount to suit the style or color scheme you want