Bridging Test - 5 to 100 mm
Copyright Claim
Bridging Test - 5 to 100 mm
Boost
39
81
35
Print Profile(2)
Standard test, 0.2mm layer, 2 walls, 100% infill
Designer
31 min
1 plate
0.6mm nozzle, 0.3mm layer, 2 walls, 100% infill
29 min
1 plate
Boost
39
81
35
1
372
387
Released
Description
Test your printer and filament with this bridging test model
The model tests bridging at 7 different lengths including:
- 5 mm
- 10 mm
- 20 mm
- 40 mm
- 60 mm
- 80 mm
- 100 mm
The bridges are 1.40 mm thick
Print settings I recommend
- 100% infill.
- 0.2mm layer height
- No supports
Comment & Rating (35)
All
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
with default profile, sag begins at 40 mm
1
Reply
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
1. Try
Hab es über das Handy gesendet und keine Einstellungen vorgenommen. Mein AMS zeigt zu hohe Feuchtigkeit, der Drucker steht mit in der Wohnstube.
Es wurden alle Abstände nahezu waagerecht gedruckt.
ab einer Bridge von 4 bekomme ich Fäden die keine Funktion haben und unten "rumhängen".
Aber ich bin begeistert das die Software das einfach ausgleicht. Den trotzdem ist es oben Waagerecht.
2. Try speed am Handy auf 50% leisemodus geändert. Identisches Ergebnis.
wow macht schon Spaß.
(Edited)
1
Reply
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
after doing work on the printer, I always print one to make sure everything was assembled correctly
0
Reply
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
was quite pleased with how well my .6mm nozzle did. wish I would've tested with this before I put my ben2c fan shroud on my hot end to see if there was a difference
0
Reply
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
Good print
(Edited)
0
Reply
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
(Edited)
Other Issues:3 series of 2 prints all failed for my part. Catastrophic bridges. Profile to review for me ☹️
Bambu Lab PLA Basic Silver 15mm3/s
0
Reply
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
0
Reply
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
good job
The designer has replied
1
Reply
Thank you
0
Reply
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
Originally I used the all in one test model and bridging kept failing. So focusing on the bridging with this model led me to a faster realization I haven't used the calibration options in the Bambu Studio! Huge difference after doing that. Also PETG is a pain sometimes so I had to pause/resume to get the nozzle wiper to kick in more often but thankfully a better nozzle wiper will fix that.
0
Reply
Which calibration options did you use that made a difference? After the 20mm section I had awful bottom layers on all the rest.
0
Reply
Print Profile
Standard test, 0.2mm layer, 2 walls, 100% infill
I scored a 40
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld