Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x197.89mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA Polytera Army Blue Transmission Distance: 0.1
PLA Polyterra SapphireBlue Transmission Distance: 0.2
PLA Polyterra Savanah Yellow Transmission Distance: 3.4
This print uses 3 unique filaments

Swap Instructions:
Start with Army Blue
At layer #13 (0.64mm) swap to SapphireBlue
At layer #25 (1.12mm) swap to Savanah Yellow for the rest.