Why?
I saw a video about the awesome Jointlocker lighter+joint case from Another Room, but I didn't like the size of it. I decided to design my own version with a little twist. It features storage for a big joint (about 120mm length and 15mm diameter). The wings Another Room created to secure the Bic lighter was clever, so I added it to my design. Now I had this big case with a lot of unused space below the lighter. The small stash was born! It's not the biggest room, but you could stash some filters for example. Check the second photo for the measurements.
Some people had issues with opening the door the first time. I made the length of the opening tip larger and opened the door a bit, so you will be 100% able to open it. I also gave it more clearance, so issues where the mechanism is too fused shouldn't be a problem anymore.
This case is for the standard Bic.
After printing:
The littlee door is print in place, you have to gently pry it open. I used a butterknife - worked like a charm. Inside is a little bit support, which breaks of easily.
If you have any suggestions for a V2, I am open for it.
Link to the weed leaf background