A1 / A1 Mini Multiple Tube Splitter AMS Lite
Copyright Claim
A1 / A1 Mini Multiple Tube Splitter AMS Lite
Boost
64
144
22
Print Profile(4)
0.12mm layer, 2 walls, 15% infill
Designer
1.7 h
1 plate
0.12mm layer, 2 walls, 15% infill
Designer
5.7 h
1 plate
0.08mm layer, 2 walls, 15% infill
Designer
7 min
1 plate
0.12mm layer, 2 walls, 15% infill
1.8 h
1 plate
Boost
64
144
22
7
97
90
Released
Description
This is a Multiple Tube Splitter for Bambu Lab A1 and A1 Mini with AMS Lite.
Just insert the 4 PTFE into the splitter. You dont need an extra PTFE extension underneath to the genuine hub. The filament at the two slots behind of it (Slot 3&4) are directly connected to the hub. Just push carefully the PTFE's into the splitter until it stops.
The 2 slots at the backside fits for 2 extra external spools.
Its a very useful splitter to keep the PTFE stable at printing and stop the wearout of push-in and push-out the tubes.
Use a wide brim to stabilize the object and decrease printing speed.
You can use AMS to print the bambulab logo. Remeber it increase the printing time. Optional you can print the logo separately.
Enjoy !
Comment & Rating (22)
All
Print Profile
0.12mm layer, 2 walls, 15% infill
Print came out great but I added some manual tree support to the internal 4 holes that had some overhangs. Used manual brim also.
1
Reply
look at mine
https://makerworld.com/zh/models/450065#profileId-356979
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Quick and easy! I should have used a better support, but can't wait to try this out.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Boosted
this is what i needed
1
Reply
look at mine
https://makerworld.com/zh/models/450065#profileId-356979
0
Reply
wait so I can use this and have all 4 ams plugged in and have two extra external spools right?
The designer has replied
1
Reply
Yes. My tip: Using the external spool you can update it to hold 2 spools. Just bought this spare part "PTFE tube connector A1": https://eu.store.bambulab.com/de/collections/spare-parts-for-a1-series/products/ptfe-tube-connector-a1 and print this one https://makerworld.com/en/models/184377?from=search#profileId-236975
0
Reply
Boosted
Printed it and it works great. for anyone wondering it does not replace the factory pies but simply slides over it.
0
Reply
look at mine
https://makerworld.com/zh/models/450065#profileId-356979
0
Reply
for me doesn't work.ams can't push filament through the rear connection
The designer has replied
0
Reply
Did you print with support? Maybe thats the problem. I recommend to print it vertical, resp. standing with brim.
0
Reply
lol if u just flipped the ams colorized one 90 degrees you would only need maybe 2 or even 1 single color change from white to green and it would only cost a few extra grans of fikament not 60 lol design smarter with the ams
The designer has replied
0
Reply
ThePrinterPrinted have updated my printing profile. But you will need support :) Have a try
0
Reply
can you please repost this with a version where all four inputs are structured like your back two? the PTFE just auto butts up against it and doesn't feed all the way through is amazing and i'd like the bottom four to be like that. Thanks
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
great thanks
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld