Hueforge print of fortnite's llama

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.86x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA smartfill grey Transmission Distance: 0.3
PLA smartfill dark grey Transmission Distance: 0.1
PLA smartfill Black Transmission Distance: 0.2
PLA smartfill pink Transmission Distance: 3.2
PLA smartfill light blue Transmission Distance: 1.4
PLA Smartfill White Transmission Distance: 4
This print uses 6 unique filaments

Swap Instructions:
Start with grey
At layer #8 (0.72mm) swap to dark grey
At layer #9 (0.8mm) swap to Black
At layer #10 (0.88mm) swap to pink
At layer #16 (1.36mm) swap to light blue
At layer #21 (1.76mm) swap to White for the rest.