Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x142.86mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 2 unique filaments
Swap Instructions:
Start with Scarlett Red
At layer #38 (1.64mm) swap to White for the rest.