Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x142.86mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.9mm and the Actual Depth is 1.9mm

Filaments Used:
PLA BambuLab Orange Transmission Distance: 5.3
PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9
This print uses 2 unique filaments

Swap Instructions:
Start with Orange
At layer #30 (1.32mm) swap to Scarlett Red for the rest.