Funny animals "Sheep" - HueForge
Funny animals "Sheep" - HueForge
Print Profile(2)
Description
Funny animals as HueForge,
I bought the pictures from. -> https://www.etsy.com/ch/listing/1650509594/aquarell-hipster-paket-mit-10?ref=hp_active-mission-recs-rv-3-2.
Picture frames are available here -> https://makerworld.com/en/models/414553#profileId-316526
And the easel is available here -> https://makerworld.com/en/models/179515#profileId-197478 and here → https://makerworld.com/en/models/199267#profileId-219795
TD determination is important, same setting, same printer, two different red filaments, completely different result.
TD Bestimmung gibt es hier -> https://makerworld.com/en/models/430903#profileId-335449
Comparison picture →
Settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 129.27x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Eryone Black Transmission Distance: 0.6
PLA+ Eryone Grey Transmission Distance: 8
PLA+ Eryone Red Transmission Distance: 4.5
PLA+ Eryone White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Grey
At layer #14 (1.2mm) swap to Red
At layer #16 (1.36mm) swap to White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
