Simple, sturdy glass holder with minimal material requirement. Modular for easy assembly. Suitable for use as a spice rack on the inside of a cabinet door or on the cabinet side. Suitable for glasses up to 80mm in diameter. Designed for standard corn/bean/pea jars with an 80mm diameter. For mounting, 3 screws measuring 3x16mm are required per glass holder. The base of the holders is always the same. For the holder rings, there are 1 left part, 3 middle parts, and 1 right part on two plates. So, 5 glass holders. This fits perfectly for a standard 600mm wide cabinet door. The base and rings are assembled with minimal force and do not need to be glued. The holders are simply assembled together with a dovetail joint. Please refer to the graphic for mounting distances.

Note: The base parts are printed with an outer brim to ensure good adhesion to the print bed. The brim can be easily removed.

Included in the print are various sprinkle attachments for standard 80mm diameter corn/bean/pea jars. These are located in the center of the rings during printing and can, of course, be removed. Tip: Thin filament threads as residues between the holes can be removed by briefly flaming them with a lighter.

Please share your print images with me.