Simple Hueforge picture from my English Bulldog.

Just one colour swap.

Scale up or down for fitting to your printer bed.

You can use PLA or PETG. Other not tested.

Slot 1: black

Slot 2: white

other Slots unused

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to White for the rest.
Enjoy the picture and always keep in the mind.. Dogs are the better humans and the best friends.

Respect Animals….