Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 130x130mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used: was from a local shop. local brand
it is PLA
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.56mm) swap to Red
At layer #13 (0.72mm) swap to Orange
At layer #18 (1.12mm) swap to Yellow for the rest.