Some years ago I made a high quality image of the full moon, by taking several exposures and ‘stacking’ them with an astrophotography software to reduce noise and pull out more detail. Well here it is 3D printed thanks to Hueforge. The print is 20cm x 19cm. Burn off any stringing after its printed. From an arm's length away it looks great.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x190.48mm in size
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic Gray Transmission Distance: 2
PLA Light Gray Transmission Distance: 3
PLA White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #11 (0.96mm) swap to Light Gray
At layer #14 (1.2mm) swap to White for the rest.