Buddha HueForge
Copyright Claim
Buddha HueForge
Boost
9
7
7
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
4.5 h
1 plate
Open in Bambu Studio
Boost
9
7
7
3
6
5
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.69x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.3mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #13 (1.12mm) swap to Pure Yellow
At layer #21 (1.76mm) swap to White for the rest.
Comment & Rating (7)
All
Boosted
beau resultat
The designer has replied
1
Reply
nice print
1
Reply
For just a little fun, I used bambu sparkle pla for the black, and gold instead of yellow.
1
Reply
Boosted
Print Profile
0.08mm layer, 1 walls, 100% infill
percioso. cada vez que viene una visita a casa me toca hacer uno
0
Reply
I love it, I changed the yellow for silk gold and it looked spectacular, thank you very much
0
Reply
Boosted
Print Profile
0.08mm layer, 1 walls, 100% infill
The designer has replied
0
Reply
Thank you
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld