Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 154x220mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.4mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 2.5
PLA BambuLab Matte Scarlet Red Transmission Distance: 4.2
PLA BambuLab Matte Mandarin Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.96mm) swap to Scarlet Red
At layer #17 (1.52mm) swap to Mandarin Orange
At layer #25 (2.16mm) swap to Jade White for the rest.
* originally designed this one in these colors and decided to switch them in the slicer to get a bit closer to the original piece.
As always please let me know if you have any tips or trick to help me better my designs.