Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA Polyterra ArcticTeal Transmission Distance: 0.1
PLA Polyterra Banana Transmission Distance: 3.8
PLA Polyterra Cotton White Transmission Distance: 3.7
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #18 (0.84mm) swap to ArcticTeal
At layer #30 (1.32mm) swap to Banana
At layer #50 (2.12mm) swap to Cotton White for the rest.