Butterfly Earrings
Butterfly Earrings
Boost
213
375
28
Print Profile(2)
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill
Designer
3.3 h
1 plate
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill - A1 mini
3.4 h
1 plate
Boost
213
375
28
8
257
142
Released
Description
Printed with standard 0.12mm layer height setting with 0.2mm nozzle. The only settings I change is wall generator to Arachne and only 1 wall on first layer. I printed on a holographic mat for the glitter effect.
Hole for earring ring is 2mm diameter.
I buy my earring hooks on amazon.
Comment & Rating (28)
All
Boosted
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill
Looks great
1
Reply
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill
Turned out beautifully with 0.4 nozzle
1
Reply
Boosted
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill
Printed good took about three tries figured out that I needed to put a brim to keep the antennas down
1
Reply
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill
Lots of filament changes, so print several pairs when you print.
(Edited)
1
Reply
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill - A1 mini
No issue even printing with 0,4 nozzle just changing the setting on bambú studio
0
Reply
That looks great! I didn't even try with the 0.4
(Edited)1
Reply
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill
Ottimo lavoro
1
Reply
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill
muy bonito
0
Reply
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill
1
Reply
how many prints can you get out of your mat? that’s pretty cool! I had never heard of that
The designer has replied
0
Reply
I've used it about 20ish times so far and its still just as great as day 1. Definitely a question I had when I bought it, but I got it pretty cheap on amazon, and so far I would say it was totally worth it.
0
Reply
Replying to @ktsglitterbar
Could you share the link for the mat, please?
0
Reply
Replying to @julio
https://www.amazon.com/gp/product/B0CR5JKV1Q/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
0
Reply
Boosted
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill
These are beautiful! I printed them with a 0.4 nozzle and they were perfect!
1
Reply
License
This user content is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld