Standard 1-1/4" attachment for a vacuum to separate dirt from darts and hold darts during dart sweep. Inside is a funnel that will remove darts from the airstream so the Vacuum doesn't Clog. Vacuum will remove some dirt from the airstream, but not all of it. Use the filter lid to shake out the remainder of the dirt. Might also design some filter lids for dart sorting as well.

Print* all parts (Nozzle Side should be SOLID), Super glue a craft foam gasket inside the lid along the inner edge, then use M3 Hardware to screw on the Nozzle and Vacuum Sides**. Use Hot glue to seal the edges around the flanges to prevent air leakage. Can be press fit onto a handheld vacuum for dart sweeping. Recommend a Ryobi hand vacuum with a 6 Ah Battery.

*Should be printable on a Bambu.

**Put the nub on the vacuum side down, it prevents the nozzle from getting jammed in the dirt.