Micro benchy
Remixed by
Copyright Claim
Micro benchy
Remixed by
Boost
5
19
7
Print Profile(1)
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Designer
12 min
1 plate
Open in Bambu Studio
Boost
5
19
7
0
36
27
Released
Description
This is a test I did with the 0.2 nozzle and it turned out very well in my opinion, it was printed at a layer height of 0.06mm. The largest is at 25% scale, the second at 15% and the smallest is 10%. Printed on bamboo pla
Comment & Rating (7)
All
Printed the smallest, not perfect, but fun!
1
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
came out fine. thx for sharing
1
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
1
Reply
it says incompatible nozzle I have 00.4mm
The designer has replied
0
Reply
the micro benchy was printed with a 0.2 nozzle at 0.06 mm, you can´t get that height with a 0.4 nozzle I think
0
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
neat
0
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
1
Reply
No more
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld