Credits to:

https://www.thingiverse.com/thing:2758102 - Joycon Rail - "I Like to Make Stuff" - Modified this rail to attach to the split mount using standard M3 bolts and nuts.

https://www.thingiverse.com/thing:5476943 - Blank Module for Z Fold 4 Case - “Arthur Bibik” - Modified this part to create the negative space for the embedded magnets.

The rest of the model has been designed by myself.

This model utilises seven small bar magnets (20mm x 6mm x 1.5mm) and standard M3 bolts and nuts. I have used M3X8mm bolts and standard M3 nuts.

The magnets are embedded into the parts during the print (I used the Prusa colour change mode on PrusaSlicer to automatically pause at the layer heights required.

I printed all parts at 0.6mm nozzle diameter and 0.2mm layer heights (Feel free to use whatever settings you like as there aren't too many small details within the prints)

Feel free to like, comment and Remix the model! I look forward to any improvements/suggestions people may have.

The Joycon rail needs to be printed at 10% scale (when I modified the STL from ILTMS in Fusion 360, l did set the scale correctly)

PLEASE NOTE: Joycons can connect via Bluetooth. However, they show up as separate controllers. They will only work with apps that allow input remapping (mainly emulators)

Changelog:

V1 - 03/01/23 - Initial Release (not actually V1, as I spent some time tinkering until it actually worked). This is the current latest version.

V1(Hole) - 10/04/23 - Received a request to keep the magnet holes open for printing, inserting the magnet and filling after. These parts are the same as V1; no changes have been made other than allowing the magnets to be fitted after printing.