Designed by Popandsicle

I was asked to share the print profile I used to print my master sword so here it is.

I've included both the standard and the ‘adhesion assisted’ versions of the models provided in the original design.

I printed a few things with standard models but ultimately ended up going with the adhesion assisted for the remainder of parts.

The adhesion assisted parts have built-in brim that will need to be removed.

Make sure to read the instructions.

My Make

I have the filament calibrated carefully so this sword could friction fit together with no glue. Only the two gold pins needed a little bit of height shaved off to fit correctly. If you want to recreate my exact print with the same filament I've already calibrated, I've included 3mf files with my filament profiles embedded. The following are the filaments you'll need:

• AMOLEN Silk PLA - Black Blue Purple
• Eryone Matte PLA - Olive Green
• Tinmorry Silk PLA - Gold
• Fiberlogy Impact PLA - Light Green
• Capricorn Metal-Like PLA - Aluminum

-

I'm learning and having fun with this. Feedback letting me know how your print went would be greatly appreciated.

If you're feeling generous and like what you see, Buy Me a Coffee or just Send me a tip.