Fallout Nuka Cola Keycap

Copyright Claim

Fallout Nuka Cola Keycap

Boost
242
457
40

Print Profile(3)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.08mm layer, 2 walls, 15% infill
0.08mm layer, 2 walls, 15% infill
Designer
57 min
1 plate
5.0(23)

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
Designer
1.5 h
1 plate
4.6(10)

.2mm Nozzle Improved Profile
.2mm Nozzle Improved Profile
1.8 h
1 plate

Open in Bambu Studio
Boost
242
457
40
35
443
296
Released

Description

ZAP THAT THIRST! Like the drink, nothing beats this keycap... the typing that'll knock you out!

 

The Nuka Cola bottle cap keycap inspired by Fallout fits on any Cherry MX compatible stem (if you remove a key and see a +, that's an MX stem and you can use this keycap), including switches from Gateron, Kailh, Outemu, and more.

Comment & Rating (40)

Please fill in your opinion
(0/5000)

Print Profile
0.08mm layer, 2 walls, 15% infill
the bottle cap is not centered and it bugs me. it fits though.
The designer has replied
0
Reply
It's centered on the area of the key (relative to the bottom of the keycap). Notice how the keycap's top is leaned towards where the key above it would be. If the bottle cap was centered on the top of the keycap, it would interfere with the key above it. That wouldn't be a concern for your case, since there isn't a key above it in your picture, but if you used it in a different position that would be a concern.
0
Reply
Replying to @craigandrews :
Fair. I wanted it for an escape key.
0
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
the print failed many times. the settings for the .2mm profile are wrong. cooling should be turned off for the first 3 layers. since it isn’t, there is bad bed adhesion especially for the little “cross” in the center of the keycap and the print fails. the cooling is then set to 100% which is ridiculous for .2mm nozzle. additionally, the initial layer height is only .1mm which further contributes to poor bed adhesion. it should be .2mm. also there should be an inner brim for better bed adhesion.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
Looks so cool! after watching Fallout i instantly was searching for cool things to print and found this keycap. thank you for the model.
0
Reply
Awesome cap! Printed it on a resin printer, and the cap has been wandering the wasteland for a while ;)
0
Reply
Looks absolutely fantastic. I printed it on the X1C with the 0.2mm nozzle.
Show original
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
I love this so much!!!
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
Ich hab sie gedruckt aber mit einem anderen Profil. Habe eine 0.20er Düse benutzt auf einem X1C. Verbesserungsvorschlag: Unten die Fassung könnte minimal größer sein. Mir ist leider unten beim drauf stecken auf die Taste die eines der beiden Fassungsteile gebrochen.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
Kids loved this and printed great
0
Reply
i printed it black and red and my keyboard is white. Can we switch.
0
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
Great print!
0
Reply