moarbian.design

cover

1713383877426_94734e21-e7e2-4bbb-895e-1265084e56dc.jpg

1713383877429_ef5c3eb7-e4e9-49be-90b3-b7ebdca0a037.jpg

1713383877440_6665d763-ea34-4ca5-9f9a-e6423447b21d.jpg

1713383877437_397f4f8f-1914-43ab-b3b0-d247c00a2929.jpg

plate_1.png

plate_1.webp

asasa_67aaa94c-051d-4b77-afa7-86fa2f54323d.webp

1713383877437_1e1072e2-abb1-485d-885d-23bc39366a79.webp

1713383877440_0c7d72ac-4979-49e0-86fa-61ae7de1aa50.webp

1713383877426_42506c4d-3c25-4edf-a6f0-c8c8da9f364c.webp

printing with my profile should work fine without any brim or support

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Weisnetde

USB C Cover_1ed38353-b7f8-4289-9a72-6494a31fb4e8.webp

fast and clean print without brim or support,0.08mm layer, 3 walls, 15% gyroid infill

High Quality Profile, 0.08mm layer, 3 walls, 15% infill

Stronger layer lines

Weaker vertically, uses less filament

plate_2.png

Jake

IMG20240419192749.jpg_compressed_7d6ff4f3-da80-41a1-a5ea-a9c2c547bd38.webp

I recommend printing the model that is at a 45 degree angle because it's much stronger vertically so there is less of a chance of it breaking in the port.

0.2mm nozzle, 0.06mm layer, 4 walls, 60% infill

JS DESIGN

20240422_133303_69bab45c-bf6f-405a-a33a-2bb05604b01d.webp

I suggest using PLA+ since it is a pretty tight fit and I would be worried about having this break in my USB-C port.

0.4 nozzle - 0.2mm layer, 2 walls, 15% infill

simple dust protection cover for your USB-C port.&nbsp;I used it for my smartphone, which i only charge wireless.&nbsp;&nbsp;

Print Profile(4)

Description

Comment & Rating (410)

License

Remixes (1)

Related Models

USB-C cover