Dragon Head

Creatività in 3D

Miniatures>Creatures

Contest Winner

0.2mm nozzle Design Challenge

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Designer

3.3 h

1 plate

4.8(57)

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill - A1 mini

3.5 h

1 plate

4.4(20)

Open in Bambu Studio

Boost

562

765

116

1.7 k

587

Released

Description

Dragon Head - High definition 0.2 nozzle

High definition Dragon Head perfect for 0.2 nozzle.
Copper colored filament: https://amzn.eu/d/51GlVEF

Removing Supports:
To remove the supports, I recommend using a small flat watch screwdriver. To remove the supports in the mouth and not ruin the teeth, I recommend first cutting the opening of the mouth with a cutter and the supports will come off easily by sliding downwards.

***See the MAXI version*** https://makerworld.com/en/models/509478

Enjoy

Comment & Rating (116)

@geoff.walkeruk

This was my first print with a 0.2mm nozzle, I am amazed at the quality and definition of this model. Even the teeth came out as intended. Now looking for more designs for 0.2mm nozzle...

The designer has replied

@YahooJAPAN

Thank you very much for your feedback, I am happy with your result

@Ezerus

Boosted

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Did this as a quick test of the 0.2 nozzle. What a beauty. Was the first time I used supports too, so I damaged a few teeth... But that was my fault. One support tree got knocked over during print, probably bad luck or poor bed adhesion. Otherwise great model!

The designer has replied

@YahooJAPAN

Thank you so much for your feedback and photos

@Vlbd

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

insane details!

The designer has replied

@YahooJAPAN

Thanks so much for the feedback and photo!

@mdistel

Boosted

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

looks super cool detail is great

The designer has replied

@YahooJAPAN

Thanks for the feedback and photos

@user_4178024762

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Support angle could probably be a little lower.

The designer has replied

@YahooJAPAN

Thanks for the feedback and the photo

@Cre8iveprint

Boosted

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

the detailed of this Dragon is sooo insane!!! fantastic job creating this. thank you sooo much.

(Edited)

The designer has replied

@YahooJAPAN

Thanks so much for the feedback and photos

@elliott.scott.r

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Good print. Thanks

The designer has replied

@YahooJAPAN

Thanks for the feedback and photos!

@angelov838

Boosted

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

it look verry good i've used petg and 0.2 nozzle

(Edited)

The designer has replied

@YahooJAPAN

Thanks for the feedback! Good job!!!

(Edited)

@CippyO

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill - A1 mini

(Edited)

Support Issue:The support pillars kept breaking, no matter what. I used gold petg for the first try, then golden prusament pla for the second time, but the same happened in both cases. See the picture.

@YahooJAPAN

I'm sorry this happens to you. I didn't create the print profile for A1 mini but another user. I can try to advise you to only use PLA. Then let me know the result.

(Edited)

@user_520052257

with me to

@user_520052257

I don’t know about him but I printed it 3 times and the supports fell of the bed all of the times. I even tried it with glue. But that’s what happens with me