Dragon Head - High definition 0.2 nozzle by Creatività in 3D

Creatività in 3D

Miniatures>Creatures

In Contest

0.2mm nozzle Design Challenge

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Designer

3.3 h

1 plate

4.9(14)

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill - A1 mini

3.5 h

1 plate

4.8(5)

Extra Large - 200% Size and smoth - 0.2mm nozzle - 0.06mm

24.2 h

1 plate

Boost

311

385

844

267

Released

Description

Dragon Head - High definition 0.2 nozzle

High definition Dragon Head perfect for 0.2 nozzle.
Copper colored filament: https://amzn.eu/d/51GlVEF

Removing Supports:
To remove the supports, I recommend using a small flat watch screwdriver. To remove the supports in the mouth and not ruin the teeth, I recommend first cutting the opening of the mouth with a cutter and the supports will come off easily by sliding downwards.

Enjoy

Comment & Rating (36)

@geoff.walkeruk

This was my first print with a 0.2mm nozzle, I am amazed at the quality and definition of this model. Even the teeth came out as intended. Now looking for more designs for 0.2mm nozzle...

The designer has replied

@YahooJAPAN

Thank you very much for your feedback, I am happy with your result

@3jyou1ma

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

It's a very wonderful work

The designer has replied

@YahooJAPAN

Thanks so much for the feedback and photo!

@dandy

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

The designer has replied

@YahooJAPAN

Thanks for the feedback!

@chapo3

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

neat

(Edited)

The designer has replied

@YahooJAPAN

Thanks for the feedback

@MagnetDanny

Boosted

I love your designs my friend, keep the good work comming, let me know if you ever need anything

The designer has replied

@YahooJAPAN

A thousand thanks!

@user_1341924872

oh my, this is so great!

The designer has replied

@YahooJAPAN

Thank you!

@GenericUser

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Ok results due to sketchy filament but still ok. Teeth were not perfect, plan to test later when new spool arrives.

The designer has replied

@YahooJAPAN

Thanks for your feedback

@RockingTiger

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Beautifull design print came out great lots of detail

The designer has replied

@YahooJAPAN

Thanks for your feedback!!!!

@MunkyCream

Print Profile

HD 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

printed at 2x scale with a 0.4 nozzle, came out pretty nice! the supports are incredibly tedious to remove without breaking anything. I lost a few dragon teeth but overall am pretty satisfied. Thanks!