This is one of my Halloween house decorations LED light box you can print. I have two frames for you to choose from. One if you have a led strip with a battery box (f_house pumpkin) so you can stick the frame on it like in the first picture or one with the frame extended down (f2_pumpkin) so you can rest it on the frame (look at the other picture)
BE AWARE!! you can only use LED strips that are 8mm wide (0,31496063 inch) the LED strip should be placed above the protruding edge.
You can find me on Tiktok under the name PrintThatBoii if you want to see how I made it.
disclaimer: I put the model on printables for free, but I appreciate it if you support me via cults3D XD
3D PRINTING SETTINGS
I printed everything with a layer height of 0.3 everyting can be printed on a 220x220 bed size (without a skirt so a purge line can be useful) Except for the white back I printed that with a 0.2 layer height. Infill doesn't matter I did the frame with 10% infill.
I printed mine on an ender 3 S1 Pro
the model is arround 215mm high with the frame from top to bottom and 181mm wide.