Model INFO:

Dimensions : 250mm x 200mm

You can scale the image, be sure to not change the Z height.

I've created a print profile so you have only to select your color in ams slot and you can hit print,

⚠️WARNING⚠️:

to insert the last colors I added pauses, you just need to manually change the colors on the ams and resume printing

if you don't have ams or you don't have bambulab printer simply follow this instruction:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Grey
At layer #11 (0.96mm) swap to Red
At layer #15 (1.28mm) swap to Orange
At layer #16 (1.36mm) swap to Lemon Yellow
At layer #17 (1.44mm) swap to White for the rest.

I hope you find this design enjoyable to print! Your feedback helps me improve designs even more. Feel free to share your thoughts below😊✨